To prevent the power strip from "getting angry", you should do this...

To prevent the power strip from "getting angry", you should do this...

recently

A fire broke out in a resident's home in Daxing District, Beijing

The cause was a faulty circuit in an old power strip that was charging the phone.

How to determine whether the power strip is aging?

How to use power strips safely?

How to determine whether the power strip is aging?

01

See the service life

The normal service life of a power strip is generally around three to five years , but it also depends on the quality and frequency of use. If it shows signs of damage or other aging, it needs to be replaced in a timely manner.

02

Look at the appearance

Frequent use or dragging can easily cause damage to the hardware facilities of the power strip. If it breaks, dust will enter the circuit and cause a short circuit, which can easily cause a fire.

03

Look at the power cord

After being used for a long time, the power cord is prone to "copper exposure" phenomenon, which can easily cause a short circuit.

04

Check electrical sockets

There are two copper sheets inside the electrical socket. During frequent plugging and unplugging, the elasticity of the copper sheets will weaken, which can easily cause false connection or poor contact of the power strip, that is, the socket is not tight, which can easily cause electric arcs or sparks.

How to use power strips safely?

Be sure to buy new national standard sockets, and do not buy universal sockets that are banned by the country. The three-phase sockets of the new national standard sockets are separated from the two-phase sockets, with 5 holes; the three-phase sockets of the universal sockets are combined with the two-phase sockets, with 3 holes.

Image source: Ministry of Emergency Management of the People's Republic of China

Sockets have rated currents and cannot be overloaded, otherwise the sockets will heat up, damage appliances, or even cause fires. Pay special attention not to plug high-power household appliances such as air conditioners and microwave ovens into sockets with low rated currents.

Image source: Ministry of Emergency Management of the People's Republic of China

Do not pull the power cord when unplugging the plug, as this may easily break the connection between the power cord and the plug, causing a short circuit or leakage, which may result in fire or electric shock.

Image source: Ministry of Emergency Management of the People's Republic of China

When the socket is too hot, sparks, the plug and socket are in poor contact, the plug is too loose or too tight, etc., stop using it and replace it immediately.

Image source: Ministry of Emergency Management of the People's Republic of China

This will result in poor contact between the plug and the socket, damage to household appliances and the plug and socket, and even cause a fire.

Image source: Ministry of Emergency Management of the People's Republic of China

Reminder again

Stay away from electrical fires

Start by reducing the burden on the power strip

<<:  Kneading and kneading, the ancient Chinese turned mud into a national treasure

>>:  Do you have any of these bad cooking habits?

Recommend

Dragon Ball Collection Collector's Edition

For the die-hard fans of Dragon Ball, it is not e...

Although Messi was eliminated, Mengniu won in World Cup brand marketing!

The course of this World Cup was full of ups and ...

5 operational lessons learned from Sina Weibo's second rise

Regarding Sina Weibo , let me first show you thre...

Many countries may face EU prosecution for alleged bias towards the public

According to foreign media reports, after the Vol...

iPhone 6 Plus exploded using iPad charger!

Although the iPhone can theoretically use an iPad...

【Physical Therapy】PNF proprioceptive neuromuscular facilitation technique

【Physical Therapy】PNF proprioceptive neuromuscula...

How much does it cost to rent a website server?

Any industry can develop its own website. Nowaday...

How do I attract targeted customers through Zhihu?

Hello everyone! The following tutorial can help y...